Canada
USA
Japan
Agni Instruments Engineers (I) Pvt. Ltd.
There are many variations of passages of Lorem Ipsum available, but the majority have suffered alteration in some form, by injected humour, or randomised words which don’t look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn’t anything embarrassing hidden in the middle of text. All the Lorem Ipsum generators on the Internet tend to repeat predefined chunks as necessary, making this the first true generator on the Internet. It uses a dictionary of over 200 Latin words, combined with a handful of model sentence structures, to generate Lorem Ipsum which looks reasonable. The generated Lorem Ipsum is therefore always free from repetition, injected humour, or non-characteristic words etc.
Agni, ROR Heat Detector
A rate-of-rise (ROR) heat detector measures the rate at which air temperature changes during a fire. ROR detectors operate by detecting a rapid rise in element temperature of 6.7° to 8.3°C (12° to 15°F) increase per minute. When the temperature rises to a level exceeding a predetermined degree, the ROR detector signals
Agni, Sounder Cum Strobe
Agni-406
Exclusive range of Fire Alarm Sounder Cum Strobe for addressable & Conventional use with Red ABS type plastic Housings. Wall mounted medium frequency Sounder Strobe designed as per NFPA-72 to complete the demand of Fire Alarm systems. The Fire Alarm Sounder Strobe is a device that produce sound & Flashing when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni Flasher/Strobe
Agni-407
Exclusive range of Fire Alarm Strobe for addressable & Conventional use with Red MS type Housings. Wall mounted type. The Fire Alarm Strobe is a device that produce Flashing when Manual Call Point & Detector sense any kind of fire activity. It alert everyone including deaf inside the building.
Agni, Telephone Jack GAC-601
Agni 601/GAC-601
It is a telephone jack socket, normally located at various places building. Common installation positioning is in the landing levels of all core stairwells and escape routes. The person on site with a mobile handset may just plug & talk to the control center. The unit should be mounted in a suitable and dry location at about 1.5m from finished floor level.
Download
Response Indicator ABS Body For False Ceiling
Agni 502
- Compatibility with all Detectors
- Dual LED Lamp
- Wall Mounted
- Ceiling Mount
- ABS Plastic
- Indoor use Only
Response Indicator ABS Body
Agni 501
- Compatibility with all Detectors
- Dual LED Lamp
- Wall Mounted
- Ceiling Mount
- ABS Plastic
- Indoor use Only
Agni, Sounder Hooter MS Body
Agni 403
Exclusive range of Fire Alarm Hooter(Sounder) Conventional type with made out of 16/18 SWG CRCA Sheet duly powder coated with PO Red Colour. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential,commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni, Sounder Hooter ABS Body
Agni 401
Exclusive range of Fire Alarm Hooter (Sounder) with addressable & Conventional type with Red & White plastic Housings. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential, commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Manual Call Point ABS Body With Blinking LED
Agni 302
Conventional manual call point is an emergency alerting device which can be activated by pressing a transparent plastic window on its front side.
The call point once activated can be reset by press. Designed for use with conventional fire alarm control panels and alarm loop by installing the module conventional zone module.
This allows the fire alarm control panel to monitor the conventional call point devices.
Agni, Manual Call Point MS Body
AGNI-301
Conventional manual call point is an emergency alerting device which can be activated by pressing a transparent plastic window on its front side. The call point once activated can be reset by using a key with the device. Designed for use with conventional fire alarm control panels and alarm loop by installing the module conventional zone module. This allows the fire alarm control panel to monitor the conventional call point
devices.
Agni, Simplex Type Talkback Slave Station
Agni Slave Talk-back Unit Can Communicate With Main Talk-back Master Panel. At Slave Unit After Pressing Ptt Switch Signal Comes On Main Master Panel Control Room Can Receive Call By Pressing Ptt Switch At Master Panel, and By This Indication Also Know Which Floor/zone Number Or Location Slave Unit Is Calling To Master Station. This Is A Simples Mod Of Communication.
Agni, Hooter Cum Speaker MS Body
AGNI-404
Exclusive range of Fire Alarm Hooter(Sounder) Conventional use with made out of 16/18 SWG CRCA Sheet duly powder coated with PO Red Colour. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential, commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Fire Fighter Telephone Hand Set with Box
- Frequency Range: 300Hz ~ 3400Hz
- Ring Sound: >70dB(A)
- Voice Distortion: less than 10%
- Operating Current: 17mA ~ 31mA
- Plug Diameter: 6mm
- Material & Color: ABS, Red
- Environment Temperature: 0?C ~ 40?C
- Humidity: 45% – 95%, non-condensing
- Weight : About 250g
Agni, Smoke Detector
Agni 202
- Advanced detection and discrimination algorithms
- Easy installation and maintenance
- Super sleek low- prole housing design
- Durable sensor head, no need for replacement
- SMD circuit board design-satisfactory quality and reliability guaranteed
- Integrated heat detector for SD 388-2H and SD 388-4H models
- N/C (normal/close)-N/O (normal/open)selectable relay output
- AR (Auto Reset) function for security systems (optional for 4 wire models)
- Five-year limited warranty
- Size: 102mm diameter with 43mm height only
Agni, Conventional Heat Detectors
Agni 203
AGNI conventional heat detectors are state-of-the- art detectors suitable for connection to conventional fire detection control and indicating equipment, or to addressable fire detection control and indicating equipment that can accept conventional type detectors1.An electronic thermostat sensor provides sensitive rate of rise alarm operation or fixed-temperature operation when the response threshold value is exceeded .The range of conventional detectors provides fire detection and alarm system designers with a Standards- compliant economical heat detector for property protection applications2 where smoke or multi-sensor detectors may not suitable due to environmental conditions.
Download Datasheet
