Shop
-
Aspiration system - Direct Release Clean Agent
- Emergency Alarm & Evacuation Switch
- Emergency Voice Communication System
- Equipment Rack
- FAS with P A & Talkback System (CPWD DSR Specification)
- FAS with P A System (BSNL Specification)
- Fire Alarm Accessories
- Fire Alarm Control System
- Fire Safety
- Gas Relese System
- Gas Suppression System
- Hooter/Hooter Flasher/Hooter cum Speaker
- Laser Cutting & Etching
- Linear Heat Detection System
- Multi Tone Sounder
- PA System
- PA/Server Equipment Rack
- Public Address / Notification Voice Announcement
- Software
- Sprinkler Annouciation Panel
- Sprinkler Announciation Panels
- Uncategorized
- UTC/GST
- Water Leakage Detection Sounder (WHITE)
- Water Leakage Detection System Cable
- Water leakage System
- X Sense Panel 2-60 Zone Detection Zone
ABS JFT 906 Firefighter Telephone Jack
A wall-mounted plug-in point for the Agni FFTH-901 handset. A firefighter plugs in on any floor, the fire alarm system logs which jack was used, and a two-way voice line opens to the fire control room. Built for high-rise buildings, malls, hospitals, offices and industrial complexes.
Adam Voice Alarm Series Plus – Exit Point Navigator Sounder with Speech (White)
The Exit Point Navigator Sounder from Agni Instruments in an EN 54-3 Compliant voice sounder with built-in power amplifier, 90 dB speech alarm output, multilingual programmable messages, and intelligent PC software configuration. Designed for reliable evacuation guidance in industrial and commercial buildings.
Agni 10 Zone Fire Alarm Panel
10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required – 2 Nos.(one to act as standby)
Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 set.
Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc.
complete as required- 1 No.
Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as
required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set. main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections,interconnections etc complete as required.
Agni CPWD DSR Fire Alarm Panel with PA System and Talk Back
The Agni 6 and 10 Zone Fire Alarm Panel is a microprocessor-based conventional fire alarm panel built as per CPWD DSR specifications. Fire detection, zone-wise public address and a 23-line simplex talk-back system sit in one double-door cabinet, with two amplifiers (main and standby) and space for two 12V 65Ah batteries.
Agni Equipment Rack – 19” Enclosed Equipment Rack Series
The Agni Equipment Rack is a 19-inch enclosed rack cabinet designed for industrial, IT, telecom, and instrumentation applications. Available from 12U to 48U, it offers standardized mounting, high structural stability, and compliance with international standards.
Agni Flasher/Strobe
Agni-407
Exclusive range of Fire Alarm Strobe for addressable & Conventional use with Red MS type Housings. Wall mounted type. The Fire Alarm Strobe is a device that produce Flashing when Manual Call Point & Detector sense any kind of fire activity. It alert everyone including deaf inside the building.
Agni Hybrid 2 & 4 Zone Fire Alarm Control Panel
The Agni Hybrid is a microprocessor-based 2 zone and 4 zone fire alarm control panel for small and medium buildings. It watches every zone loop for open and short circuits, shows each zone’s status on its own LED and on a 16×2 LCD, and keeps running on battery during power cuts.
Agni Hybrid Fire Alarm Control Panel
Agni 1012
AGNI HYBRID fire alarm control panels demonstrate that value doesn’t have to come at the expense of quality, and that small building owners don’t have to settle for second-rate fire protection. With AGNI HYBRID comes a full lineup of advanced features designed expressly for new and retrofit projects that cry out for simplicity, yet need state of- the-art protection. These two attributes aren’t mutually exclusive in a fire alarm control panel. At least not now.
Agni Response Indicator ABS Ceiling Surface Flash Mounted 502
A dual-LED flush mount response indicator designed for conventional and addressable fire detectors, providing instant and clear visual alarm indication in flush mounted or inaccessible areas.
Agni Response Indicator ABS Concealed 501 | Dual LED Fire Indicator
Agni Instruments Engineers India Private Limited manufactures a dual-LED 501 response indicator compatible with both conventional and addressable fire alarm detectors. Built with a durable ABS Plastic Enclosures , it connects directly to the detector base and provides a clear, bright red visual indication when the detector goes into alarm, ensuring fast and reliable identification of the alarm source.
Agni Response Indicator Concealed 503 | Dual LED Fire Alarm Indicator
Agni Instruments Engineers India Private Limited manufactures a dual-LED 503 response indicator compatible with both conventional and addressable fire alarm detectors. Built with a durable sheet-metal body for wall mounting, it connects directly to the detector base and provides a clear, bright red visual indication when the detector goes into alarm, ensuring fast and reliable identification of the alarm source.
Agni Universal Air Smoke Sampling Duct Detector Enclosure
The Universal Air Smoke Sampling Duct Detector Enclosure is designed to detect smoke inside HVAC and ventilation ducts before it spreads throughout a building. The enclosure supports both conventional and addressable smoke detectors and ensures reliable smoke detection by continuously sampling airflow through specially designed inlet and outlet tubes. It features a transparent inspection cover, high-strength ABS enclosure, and supports airflow speeds from 0.2 m/s to 20 m/s, making it suitable for commercial HVAC fire detection systems.
