Shop
-
Aspiration system - Control Relay Modules
- Corresponding Signal Indicator
- Detection Devices
- Direct Release Clean Agent
- Emergency / Notification Voice Announcement
- Emergency Voice Communication System
- Fire Alarm Accessories
- Fire Alarm Control Panels
- Conventional Fire Alarm Series
- Intelligent Addressable Panel's
- 1 Loop Addressable Fire Alarm Control Panel
- 10 Loop Addressable Fire Alarm Control Panel
- 2 Loop Addressable Fire Alarm Control Panel
- 4 Loop Addressable Fire Alarm Control Panel
- Backnet/ModBus Card
- Handheld Programmer for Addressing of Addressable devices
- Intelligent Addressable Fire Alarm Accessories
- Repeater Panels
- RS-232 Communication Card
- RS-485 Network communication card
- Software
-
-
- Fire Safety
- Gas Suppression System
- GOVT. OF INDIA CPWD DSR
- Linear Heat Detection
- Notification Alarm Devices
- PA System
- Safety & Directional Signage
- Signaling Devices
- Uncategorized
- UTC/GST
- Water Leakage Detection System
Agni, Hooter Cum Speaker MS Body
AGNI-404
Exclusive range of Fire Alarm Hooter(Sounder) Conventional use with made out of 16/18 SWG CRCA Sheet duly powder coated with PO Red Colour. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential, commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni, Manual Call Point MS Body
AGNI-301
Conventional manual call point is an emergency alerting device which can be activated by pressing a transparent plastic window on its front side. The call point once activated can be reset by using a key with the device. Designed for use with conventional fire alarm control panels and alarm loop by installing the module conventional zone module. This allows the fire alarm control panel to monitor the conventional call point
devices.
Agni, ROR Heat Detector
A rate-of-rise (ROR) heat detector measures the rate at which air temperature changes during a fire. ROR detectors operate by detecting a rapid rise in element temperature of 6.7° to 8.3°C (12° to 15°F) increase per minute. When the temperature rises to a level exceeding a predetermined degree, the ROR detector signals
Agni, Simplex Type Talkback Slave Station
Agni Slave Talk-back Unit Can Communicate With Main Talk-back Master Panel. At Slave Unit After Pressing Ptt Switch Signal Comes On Main Master Panel Control Room Can Receive Call By Pressing Ptt Switch At Master Panel, and By This Indication Also Know Which Floor/zone Number Or Location Slave Unit Is Calling To Master Station. This Is A Simples Mod Of Communication.
Agni, Smoke Detector
Agni 202
- Advanced detection and discrimination algorithms
- Easy installation and maintenance
- Super sleek low- prole housing design
- Durable sensor head, no need for replacement
- SMD circuit board design-satisfactory quality and reliability guaranteed
- Integrated heat detector for SD 388-2H and SD 388-4H models
- N/C (normal/close)-N/O (normal/open)selectable relay output
- AR (Auto Reset) function for security systems (optional for 4 wire models)
- Five-year limited warranty
- Size: 102mm diameter with 43mm height only
Agni, Sounder Cum Strobe
Agni-406
Exclusive range of Fire Alarm Sounder Cum Strobe for addressable & Conventional use with Red ABS type plastic Housings. Wall mounted medium frequency Sounder Strobe designed as per NFPA-72 to complete the demand of Fire Alarm systems. The Fire Alarm Sounder Strobe is a device that produce sound & Flashing when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni, Sounder Hooter ABS Body
Agni 401
Exclusive range of Fire Alarm Hooter (Sounder) with addressable & Conventional type with Red & White plastic Housings. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential, commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni, Sounder Hooter MS Body
Agni 403
Exclusive range of Fire Alarm Hooter(Sounder) Conventional type with made out of 16/18 SWG CRCA Sheet duly powder coated with PO Red Colour. The wall mounted medium frequency hooter designed as per NFPA-72 to complete the demand of Fire Alarm systems in several areas of residential,commercial & Industrial application. The Fire Alarm Hooter is a device that produce sound when Manual Call Point & Detector sense any kind of fire activity. It has dual tone sound and it is enough to make alert everyone inside the building.
Agni, Telephone Jack GAC-601
Agni 601/GAC-601
It is a telephone jack socket, normally located at various places building. Common installation positioning is in the landing levels of all core stairwells and escape routes. The person on site with a mobile handset may just plug & talk to the control center. The unit should be mounted in a suitable and dry location at about 1.5m from finished floor level.
Download
