Shop
-
Aspiration system - Control Relay Modules
- Corresponding Signal Indicator
- Detection Devices
- Direct Release Clean Agent
- Emergency / Notification Voice Announcement
- Emergency Voice Communication System
- Equipment Rack
- Fire Alarm Accessories
- Fire Alarm Control Panels
- Conventional Fire Alarm Series
- Intelligent Addressable Panel's
- 1 Loop Addressable Fire Alarm Control Panel
- 10 Loop Addressable Fire Alarm Control Panel
- 2 Loop Addressable Fire Alarm Control Panel
- 4 Loop Addressable Fire Alarm Control Panel
- Backnet/ModBus Card
- Handheld Programmer for Addressing of Addressable devices
- Intelligent Addressable Fire Alarm Accessories
- Repeater Panels
- RS-232 Communication Card
- RS-485 Network communication card
- Software
-
-
- Fire Safety
- Gas Suppression System
- GOVT. OF INDIA CPWD DSR
- Linear Heat Detection
- Notification Alarm Devices
- PA System
- Safety & Directional Signage
- Signaling Devices
- Uncategorized
- UTC/GST
- Water Leakage Detection System
Agni 10 Zone Fire Alarm Panel
10 Zone panel for fire alarm system 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required – 2 Nos.(one to act as standby)
Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 set.
Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc.
complete as required- 1 No.
Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as
required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos.12 volt, 60 AH each sealed maintenance free batteries -1 set. main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections,interconnections etc complete as required.
Agni Equipment Rack – 19” Enclosed Equipment Rack Series
The Agni Equipment Rack is a 19-inch enclosed rack cabinet designed for industrial, IT, telecom, and instrumentation applications. Available from 12U to 48U, it offers standardized mounting, high structural stability, and compliance with international standards.
Agni Flasher/Strobe
Agni-407
Exclusive range of Fire Alarm Strobe for addressable & Conventional use with Red MS type Housings. Wall mounted type. The Fire Alarm Strobe is a device that produce Flashing when Manual Call Point & Detector sense any kind of fire activity. It alert everyone including deaf inside the building.
Agni Hybrid Fire Alarm Control Panel
Agni 1012
AGNI HYBRID fire alarm control panels demonstrate that value doesn’t have to come at the expense of quality, and that small building owners don’t have to settle for second-rate fire protection. With AGNI HYBRID comes a full lineup of advanced features designed expressly for new and retrofit projects that cry out for simplicity, yet need state of- the-art protection. These two attributes aren’t mutually exclusive in a fire alarm control panel. At least not now.
Agni Response Indicator ABS Ceiling Mounted Concealed 502
A dual-LED concealed response indicator designed for conventional and addressable fire detectors, providing instant and clear visual alarm indication in concealed or inaccessible areas.
Agni Veiga Handheld Programming Unit – ALPU1000
The Agni Veiga Handheld Programming Unit is a portable, battery-powered device designed to read, configure, and program parameters of Agni Veiga analogue addressable devices. Programming and diagnostic unit for Agni Veiga analogue addressable devices. Enables address setting, parameter configuration, firmware reading, and device diagnostics using an in-built keypad and display.
Agni Veiga Intelligent Addressable Detector Mounting Standard Base
The Detector Mounting Standard Base is a durable mounting solution for Agni Veiga Series intelligent addressable detectors, designed for secure ceiling installation, easy wiring, and reliable detector locking.
Agni Veiga Intelligent Addressable Series Zone Monitor Module (IND-VMCZ100)
A Zone Monitor Module is an interface device that connects and supervises non-addressable (conventional) detectors or third-party input devices using standardized @ resistor values. It provides continuous monitoring for alarm, open-circuit, and short-circuit conditions and reports these states digitally to an addressable fire alarm control panel. Each module has a dedicated digital address for identification.
Agni Veiga Series Intelligent Addressable Active Repeater Panel – 16 Node
The Intelligent Active Repeater Panel – 16 Node from the Agni Veiga Series is a microprocessor-based, intelligent addressable networked repeater designed to operate with a master fire alarm control panel. It provides real-time event monitoring, remote control functionality, and a large graphical LCD display, making it suitable for industrial, commercial, institutional, and government fire alarm applications.
Agni Veiga Series Intelligent Addressable Analog Photothermal Detector (Multi-Criteria)
The Agni Intelligent Addressable Analog Photothermal Detector combines advanced smoke and heat sensing with intelligent algorithms to deliver early fire detection while minimizing false alarms, making it ideal for critical and complex environments.
Agni Veiga Series Intelligent Addressable BACnet / Modbus Communication Card
The Agni Veiga Series Intelligent Addressable BACnet / Modbus Communication Card enables seamless integration between Agni fire alarm control panels and external Building Management Systems (BMS), SCADA, or PLC platforms.
It converts proprietary fire panel data into standard Modbus RTU (RS-485) or TCP/IP, allowing real-time monitoring of alarms, faults, zones, and device statuses through third-party systems.
Agni Veiga Series Intelligent Addressable Control Module
An intelligent addressable control module assigned acts as a smart intermediary for third-party systems actions for other buildings relevant, like shutting off HVAC, recalling elevators, or activating horns/strobes, and vice versa, integrating diverse devices into an addressable system for enhanced safety and coordinated response during a fire.
